When servicing the boiler:
Due to the use of high-pressure electricity, all electrical connections to the system must be disconnected to prevent the risk of electric shock. The boiler drain must be open and unblocked. To prevent burns and the resulting hazards, ensure that the steam boiler is cold before performing maintenance and repair operations.
During operations
Boiler inspection checklists should be completed by the operator at specified times.
The ventilation and exhaust exits of the steam boiler must not be blocked in any way and must always remain open.
Never leave a steam boiler without water.
The device operator must be present at the boiler operation site 24 hours a day and ensure the boiler is operating properly.
Warning:
Operator
- Please read the instructions below in full. Failure to comply with the instructions will result in disciplinary action.
- Failure to follow this instruction could result in financial and personal injury.
- This manual is intended exclusively for technical personnel familiar with steam boilers.
- The checklists provided in this manual are completed periodically and reviewed annually.
- Prevent unauthorized persons from entering the engine room.
Warning:
Installer
- Please read the manual completely before installing the office equipment.
- All plumbing should be done based on the installation location of the device and using existing standards.
- The steam boilers in the factory have been heated and their proper operation has been ensured.
- In case of any damage to the boiler, coordinate with the boiler manufacturer.
- Avoid opening manhole covers or other items that may cause the system to leak.
