When servicing the boiler:
In order to prevent burns and the resulting hazards, ensure that the steam boiler is cold before performing repair and maintenance operations.
Due to the use of high-voltage electricity, all electrical connections to the system must be disconnected to prevent the risk of electric shock.
Make sure the boiler’s drain is open and not blocked.
During operations
Boiler inspection checklists should be completed by the operator at specified times.
The ventilation and exhaust exits of the steam boiler must not be blocked in any way and must always remain open.
Never leave a steam boiler without water.
The device operator must be present at the boiler operation site 24 hours a day and ensure the proper functioning of the boiler.
Warning:
Operator
- Please read the following instructions in full. Failure to comply with the above items will result in
- Failure to follow these instructions can result in financial and personal injury.
- This manual is intended exclusively for technical personnel familiar with steam boilers.
- The checklists provided in this manual are periodically completed and
- It will be reviewed annually.
- Prevent unauthorized persons from entering the engine room.
Warning:
Installer
- Read the manual completely before installing the device.
- All plumbing should be done based on the installation location of the device and using existing standards.
- The steam boilers have been tested in the factory and their proper functioning has been ensured.
- In case of any damage to the boiler, coordinate with the boiler manufacturer.
- Avoid opening any manhole covers or other items that may cause the system to become unsealed.
